Where To Buy Leather Shoe Laces

We understand that estimating shoelace length is tricky! If your laces have been damaged or lost, it can seem almost impossible to get the right length when you order replacement laces. It doesn't have to be a challenging feat to get the exact shoelaces you need! Check out our Shoelace Length Guide below and get the right length every time.

where to buy leather shoe laces

Still unsure? Contact one of our friendly customer service representatives to help walk you through getting what you want. Call us at 706.543.3018 or email info@shoelacesexpress.com today.

Can't wait? Take a look at a few similar products we currently have available in your size! Add a dose of heritage to any pair of boots or shoes with our premium leather laces. Made from high quality USA hides with an alum tannage, which increases durability and ensures they'll look even better every time you lace up.

Our laces are designed with careful thought and precision to ensure they'll stand the test of time, and look good for years to come. Using premium materials, construction, and testing, Cobbler's Choice shoe laces are sure to take your footwear to the next level.

Leather Boat Laces are made from genuine leather. Suited for use in boat shoes, docksiders, moccasins, work boots, tramping boots and many other shoe types. They have a square, 3x3mm, profile and can easily be cut shorter if required. 120cm long. Sold in pairs

When it comes to altering formality, elevating appearances, and adding pop, new shoelaces, and bootlaces can have an effect similar to buying an entirely new pair of shoes or boots! Best of all, they are comparatively inexpensive and totally reversible, unlike many other alterations you could make to your outfit. While thick shoelaces are best reserved for athletic shoes, dress shoes will benefit from elegantly slim round or flat shoelaces that emphasize the finer points of beautiful footwear. All Fort Belvedere shoelaces have been extensively tested for durability, functionality, and longevity, and we also offer longer laces that can be worn with boots.

IF SHOELACESWhile it may seem that all shoelaces are the same, nothing could be further from the truth. Shoelace varieties massively impact the look and functionality of your shoes and should never be ignored. Thick, bulky shoelaces are intended to be worn only with athletic shoes. Dress shoes should be worn with slim, elegant shoelaces that are round or flat, depending on the shoe type and formality.

Made in Italy. Adhering to the quality standards of Italian craftsmanship, these evening shoelaces possess unparalleled durability and unequaled beauty thanks to their quality construction and marvelous luster.

Formal evening shoelaces should be worn with formal evening laced shoes, either well-shined black oxfords or patent leather oxfords. Bar lacing is the conventional lacing schema because it provides the most majestic and dignified effect for shoelaces worn with tuxedos, dinner suits, and tailcoats.

These laces are intentionally a bit longer than necessary so that you can trim them to the length you prefer (hint: cut them with a point at the end for easy threading). Natural leather laces will also stretch over time.

Please note that for our child shoes, these laces will only work if the shoe was made with our lace closure option. We cannot modify shoes already made with our Velcro or elastic closure to fit these laces.

If you want to take it a step further for your evening shoes, either your patent leather, capless Oxfords, or if you go with a cap toe Oxford, you can put in evening laces that match your bow tie. So, if you have a satin bow tie, you can get satin laces or a velvet bow tie with velvet laces.

Most traditional dress shoelaces tend to be anywhere between 75 and 80 centimeters, which is about 29 to 31 inches. A typical classic Oxford has around five rows of eyelets or ten eyelets, and Boots, typically more.

As alluded to earlier, the color of your shoelaces can have a huge impact on the overall appearance of your shoes and your outfit. Generally, the closer the color of your shoelace is to that of your shoe, the more formal and unassuming the whole ensemble will look. Think about black Oxford with black shoelaces and brown derby with brown shoelaces.

For example, it can look great to match the color of your shoelace, maybe, with your tie, your shirt, or your pocket square, because it creates a cohesive look. Also, it just costs a few bucks to exchange your shoelaces, but it feels like a new pair of shoes.

You start the same way, but now, you cross, and the underside comes up, and it is pushed through, outside in. So, you have a bar lace that is straight at the bottom, and then the crossing starts, but all the laces are always visible on the upper of the leather.

Personally, I try to avoid lacing the bottom in the beginning from the inside as it looks inconsistent and, therefore, off. Also, pay attention that when crossing the shoelaces, always go into the eyelets from the top. If you do it once from the bottom and then once from the top, it looks off and inconsistent.

You should experiment to see what feels more natural to you and adjust your tying accordingly. Remember to test by pulling on the body of the shoe to see where the knot sits at the proper 90-degree angle to the long axis or if it shifts improperly. Practice makes perfect.

While replacing your shoelaces may seem like the easiest way to freshen them up, that can quickly become costly. Instead, you can keep your shoelaces looking new with a few items from your laundry room.

There is no one-size-fits-all when it comes to cleaning shoelaces. This is because they're made of different textures and materials. On top of that, you can hand wash or use a washing machine when cleaning shoelaces.

Remove any dirt from your leather shoelaces by using a small shoe brush to save effort and spare the fabric. Since leather laces are not absorbent like synthetic fibres, they don't need extra handling because they have not absorbed the excess dirt they were exposed to.

Let the laces soak in warm water briefly, then gently apply soap to the whole lace shaft. Don't soak the leather shoelaces in the soap solution as this can discolour and ruin the leather shoelaces' tan. Instead, wipe the shoelaces using a damp cloth or rag.

Apply your choice of natural oil (like olive oil or coconut oil) to restore the leather's sheen using a clean rag. Ensure you use rubber gloves and work above a drop cloth as leather treating oils can stain surfaces. Allow the oil to soak in your clean shoelaces, where the oil will help soften and improve the leather laces' appearance.

After your leather shoelaces air dry for at least an hour, wipe off any excess oil and wait until the laces are completely dry. Then replace them to avoid staining your leather shoes or damaging them. You can now rock your clean laces on your clean shoes.

Now available in an unprescendented number of colors (black, dark brown, medium brown, and light brown) and lengths (60 cm, 75 cm, 80 cm, 85 cm, and 120 cm), our Kirby Allison Wellington Shoelaces feature a finesse that one expects with the highest-quality shoes. Replace a pair of tired shoelaces and refresh the look of your dress shoes!

Shoelaces have a disproportionate effect on the overall look a pair of shoes. A pair of old, worn out pair of shoelaces will not uphold the formal dress look that you want in a well-polished pair of shoes. That's why here, at Kirby Allison, we have one of the most comprehensive and complete selections of shoelaces for dress shoes available anywhere on the Internet!Available Styles:

Shoelaces, also called shoestrings (US English) or bootlaces (UK English), are a system commonly used to secure shoes, boots, and other footwear. They typically consist of a pair of strings or cords, one for each shoe, finished off at both ends with stiff sections, known as aglets. Each shoelace typically passes through a series of holes, eyelets, loops or hooks on either side of the shoe. Loosening the lacing allows the shoe to open wide enough for the foot to be inserted or removed. Tightening the lacing and tying off the ends secures the foot firmly within the shoe. The laces can be tied in different shapes, most commonly a simple bow.

Traditional shoelaces were made of leather, cotton, jute, hemp, or other materials used in the manufacture of rope. Modern shoelaces often incorporate various synthetic fibers, which are generally more slippery and thus more prone to coming undone than those made from traditional fibers. On the other hand, smooth synthetic shoelaces generally have a less rough appearance, suffer less wear from friction, and are less susceptible to rotting from moisture. Specialized fibers like flame resistant nomex are applied in safety boots for firefighters.

Elastic laces both make the lacing more comfortable, as well as allowing the shoe to be slipped on and off without tying or untying, which makes them a popular choice for children, the elderly and athletes.

Shoelaces with a flat cross-section are generally easier to hold and stay tied more securely than those with a round cross-section due to the increased surface area for friction.[1] Very wide flat laces are often called "fat laces". Leather shoelaces with a square cross-section, which are very common on boat shoes, are notoriously prone to coming undone.

When a shoelace is secured with a knot, the lace is crimped, or squashed. Primarily this is what stops the lace from coming undone. In effect, the lace is narrower inside the knot than it is on the loose end, and the loose end cannot make itself smaller and slide though the knot. Generally, a flat tubular lace will stay tied more easily than a round lace with a core because the flat lace can be more crimped within the knot. Most laces, however, are round and have core of cotton yarn, especially boot laces. For these to stay tied securely, the core on the inside of the lace must be soft and compressible. A secondary factor of laces coming undone is the knot itself slipping. This is due to a lack of friction. Cotton laces have a rough surface and will make a more reliable knot compared to polyester (the most common yarn used in shoelaces). In addition, a lace can be smooth or have a coarse surface, which will also affect performance. Finishing processes are available, including waxing and silicone treatments, which enhance friction and stop knot slippage. These are important design factors in the manufacture of hiking-boot laces. 041b061a72